Transmission Cross Member

    For this swap, it was also necessary to swap out the M6 cross member and put in a stock 4th Gen Fbody A4 Crossmember. Perfect! A factory part and everything bolts up as it should!

   Here's both the M6 and the A4 Crossmembers so you can see the relative difference.

The A4 version is on top, the stock M6 below. Note that both have been 'trimmed' to work with my ModernMuscleCar Offroad Ypipe and Hooker Long Tubes.

Here's another angle of the same crossmembers so you can see the extent of the trimming I had to perform to get my big ol' Y pipe to fit.